|
 |
| Cut: A diamond's ability to reflect light determines its display of fire and brilliance. Diamonds are usually cut with 58 facets, or separate flat surfaces. These facets follow a mathematical formula and are placed at precise angles in relation to each other. This relationship is designed to maximize the amount of light reflected through the diamond and to increase its beauty. |
| Color: The best color is no color. Diamonds allow light to be reflected and dispersed as a rainbow of color. This light dispersion, or color flash, has no effect on the technical grading of color. The absolute finest colorless stone carries a D rating, descending through each letter of the alphabet to Z, designating a diamond of light yellow, brown, or gray. This body color may be caused by the presence of trace elements, such as nitrogen, within the atomic framework of the carbon crystal. These trace elements are so minute that they are scientifically measured in parts per million (ppm). As the body color becomes more intense, the grade for color descends the scale. These gradations are so minute and precise that discerning a single grade (even by an expert) under less than ideal laboratory conditions is extremely difficult. It is always best to compare diamonds graded by either the Gemological Institute of America (GIA) or the American Gem Society (AGS) for accurate color grading. When directly comparing diamonds for color, most consumers are unable to detect a difference unless they are at least two or three color grades apart. We recommend selecting a diamond with a color grade of K or better. |
| Clarity: Almost all diamonds contain very tiny natural birthmarks known as inclusions. To determine a diamond's clarity, an expert views it under 10 power magnification. In addition to internal inclusions, surface irregularities are referred to as blemishes. These two categories of imperfections-inclusions (internal) and blemishes (external)-make up clarity. The fewer the imperfections, the rarer and more valuable the diamond. Many inclusions are not discernable to the naked eye and require magnification to become apparent. A laboratory-certified clarity rating of SI2 represents the point at which inclusions are technically not apparent to the average naked eye. Contrary to popular belief, higher clarity does not always mean more beautiful. If the inclusions are not visible to the naked eye, a higher clarity does not really improve the appearance of a diamond but rather the rarity and price. A higher clarity is more desirable and valuable, but knowing that you have selected the right clarity for the right reasons is most important. We recommend a clarity of SI2 or better. Clarity is graded using a very precise and complex method of evaluating the size, location, and visibility of inclusions. The diagrams to the right show a top view of a round diamond. The inclusions, shown in red, are an approximate sample for each clarity rating. The plotted inclusions may not be actual size for display purposes. Remember, the inclusions depicted in red are not visible to the average naked eye until the I1-I3 clarities. Below is the technical clarity scale with a description of each term. |
| Carat-Weight: Most people compare carat weight to size. The larger the diamond the more it weighs. The weight of a diamond is expressed in carats. The word carat originated from the carob tree or Ceratonia siliqua. The tiny seeds of this tree are well known for their uniformity and consistent weight. Traditionally diamonds and gemstones were weighed against these seeds until the system was standardized, and one carat was fixed at 0.2 grams. One carat is divided into 100 points. A diamond weighing one quarter of a carat can also be described as weighing 25 points or 0.25 carats. Points are generally not used to describe weights over one carat. Here are some examples of different weights for round diamonds and their corresponding sizes. These may not be actual size due to your monitor. The approximate girdle diameter is displayed in millimeters. The rarity of a diamond is greatly affected by its size. The rarity of a 1.00 carat diamond is much greater than twice that of a .50 carat. Although it only weighs twice as much, the 1.00 carat is statistically much more difficult (rare) to mine than the .50 carat. For an easy comparison of price and size, see the table below. Prices are approximate and based upon D Color, internally flawless, excellent cut. |
| start | profile | contact | glossary | Site map | Links | The Island |
|
|